(4 reviews) Write a Review
6.00 LBS
Free Shipping

Product Overview

This wiring kit has everything you need to hook up 2 compressors. This is what we use on our show quality installations.

  • (20-ft) 4-Gauge, Tinned 100% Oxygen-Free Copper (1,666 strands), Flexible Red Power Cable
  • (10-ft) 8-Gauge, Tinned 100% Oxygen-Free Copper, Flexible Red Power Cable
  • (1 pc) 4-Gauge Mini-ANL Fuse Holder (main fuse holder)
  • (1 pc) 70-amp Mini-ANL Fuse (for main fuse holder)
  • (3 pcs) Standard/Mini/Micro Fuse Taps
  • (3 pcs) Standard/Mini/Micro 5-amp Fuses
  • (1 pc) Small Hex Wrench Tool
  • (1 pc) Large Hex Wrench Tool
  • (6 pcs) Screws For Fuse Holder Mounting
  • (2 pcs) 14/16-Gauge Blue Female Connectors (for pressure switch)
  • (1 pc) +12-v/100-amp EVOLVE Heavy Duty Relay
  • (2 pcs) 4-Gauge Ring Terminals (Pre-crimped)
  • (2 pcs) 8-Gauge Ring Terminals (Pre-crimped)
  • (2 pcs) 8-Gauge Mini-ANL Fuse Holder (for compressors)
  • (2 pcs) 40-amp Mini-ANL Fuses (for compressors)
  • (20-ft) 18-Gauge Yellow Wire w/Ring Terminal
  • (5-ft) 18-Gauge Black Wire w/Ring Terminals For Relay / Pressure Switch
  • (25 pcs) Black Cable Ties
  • (2 pcs) 12-Gauge Ring Terminals (for compressors grounds)
  • (2 pcs) 6mm Nut/Bolt/Washer Assemblies (for compressor grounds)
  • (2 pcs) 6mm Nut/Bolt/Washer Assemblies (for mounting relay)
  • (1 pc) 6mm Nut/Bolt/Washer Assemblies (for pressure switch ground) 

Wiring schematic is online to download.







 warning-triangle-ca-final-01.pngWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


(4 reviews) Write a Review

4 Reviews Hide Reviews Show Reviews

  • 5
    Good product

    Posted by Nathaniel on 3rd Mar 2023

    According to the shop that’s going to do the insulation. He have use AVS products in the past so the suggestion was to get this product because he knows it works..

  • 5
    Dual comp kit

    Posted by Tanner on 4th Sep 2021

    Easy install everything have enough footage to reach from the battery to the back of the truck (4dr long bed). Good crimps on all connections. The only thing I did have a problem with was the in-line fuse tap I have the mini fuses and they didn’t fit properly in my box so had to wire it into a toggle switch but other than that everything was good quality and easy to install!

  • 5
    EVOLVE Dual compressor wiring kit

    Posted by Bruce Deslauriers on 29th Sep 2020

    As a novice, I wanted a plug & play kot for wiring that used HIGH END components. This Evolve kit is definitely that. Pre made with shrink wrapped posts and heavy guage wire. BUY THIS KIT! The electrical portion of your air ride is IMPORTANT, don't skimp. And the customer service was outstanding!

  • 4
    Good wiring kit

    Posted by Guy on 1st Jul 2019

    The Evolve dual compressor wiring kit provides everything you need to get your comps up and running. Having the large 4 gauge battery wire, 8 gauge secondary wire and the beefy relay takes the hassle out of having to wire up two separate relays, grounds, etc. This kit makes wire management a breeze.

    I would say the components of the kit are all good quality but I felt the screws to mount the fuse holders were sub-par. It would be nice for Evolve to include self-tapping screws instead of the ones supplied in the kit which even after pre drilling holes, the threads on the screws became damaged and I ended up having to use different screws. A higher grade female connector that plugs into the pressure switch also wouldn't hurt. Despite a few very minor issues with some of the parts, I would highly recommend this product to anyone looking to wire up their compressors.