Product Overview
VIAIR 2 GALLON AIR SOURCE KIT FAST FILL TO 200psi (12v)
(FREE SHIPPING TO THE LOWER 48 STATES)
Viair P/N 20007
Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 3/8-inch port compression fitting for 1/2-inch air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. A 40-amp relay and an appropriately-rated fuse is recommended for use with this unit.
INCLUDED PARTS:
- 380C Pewter Air Compressor
- 2 Gallon Air Tank
- Pressure Switch (165 PSI On / 200 PSI Off)
- Safety Valve (250 PSI)
- Drain Cock
- Leader Hose with Check Valve
SPECIFICATIONS:
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 100 PSI
- Max. Working Pressure: 200 PSI
- Max. Amp Draw: 21 Amps
- Dimensions: 19"L x 5.9"W x 14.2"H
- Net Weight: 21.05 lbs.
| 2.0 Gallon Tank | Fill Rate |
| 0 to 200 PSI | 5 min. 39 sec. |
| 165 to 200 PSI | 1 min. 29 sec. |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.