Ever wish you had just the right length of bars for the vehicle your working on? Now you can! This kit includes four TIG welded 32” bars that can be cut to your desired length, then simply weld in our machined threaded insert. Install the forward parallel bars into the front leaf spring hangers, and use our mounting brackets for the rest. This is our best performing link kit, BUT we strongly recommend that it gets installed by a qualified professional! Due to many different mounting ideas, variances between vehicles, ride height preference, etc. we do not include any instructions for this kit.
- (4) 1.50” TIG WELDED LINK BARS, 32” LONG (WHICH CAN BE CUT DOWN)
- (4) WELD-IN THREADED INSERTS
- (4) ADJUSTABLE THREADED ROD ENDS (TIG WELDED)
- (8) 1.5” URETHANE BUSHING SETS
- (8) BUSHING SLEEVES
- (6) PAIRS OF MOUNTING TABS
- (1) HARDWARE PACK
- (6) 9/16 Bolts
- (6) Locknuts
- (12) Washers
WARNING:IF YOU PLAN ON INSTALLING YOUR LOWER BAG MOUNTS ONTO YOUR LOWER LINK BARS, THIS WILL REQUIRE A FULL GUSSET WELDED TO THE UNDERSIDE OF THE LOWER LINK BARS FOR PROPER REINFORCEMENT AS WELL AS A SPECIALLY MADE CENTERED LOWER BAG MOUNT (BOTH ITEMS SOLD SEPARATELY). WITHOUT THESE GUSSETS, YOUR LINK BARS WILL BEND AND WILL NOT BE COVERED UNDER WARRANTY
ATTENTION!!! THE INSTALLATION OF THIS KIT SHOULD BE PERFORMED BY A QUALIFIED PROFESSIONAL!!! NO WARRANTIES OR GUARANTEES ON THIS KIT ARE APPLICABLE!!! SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE CAN OCCUR IF NOT INSTALLED PROPERLY!!! INSTALL AT YOUR OWN RISK!!!
PLEASE SEE BELOW FOR THE OPTION.
- OPTION #1: 2 BAG MOUNTS & 24" LINK BAR REINFORCEMENT
- OPTION #2: 2 BAG MOUNTS & 29" LINK BAR REINFORCEMENT
- OPTION #3: 2 BAG MOUNTS & 24" LINK BAR REINFORCEMENT
- OPTION #4: 2 BAG MOUNTS & 29" LINK BAR REINFORCEMENT
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.