Loading... Please wait...


Hover over image to zoom

  • Image 1
  • This bender is one of the best for all metals - Copper, Aluminum and especially Stainless Steel.  Stainless steel tubing requires the least maintenance and the finish can be easily brushed or polished, but it is the hardest tubing to bend. If you purchase a cheap tubing bender, chances are it will crack and break while using it on Stainless.  This tube bender was made tough to do the job right and to last.  DON'T BUY INFERIOR TOOLS!  PLEASE BE WARNED!!!
  • Image 3
  • This is the same TUBE CUTTER that we use here on all of our installs.  This cutter comes with one stainless steel cutting wheel already installed as well as 1 extra stainless steel cutting wheel conveniently stored inside the handle.  It also includes 2 additional cutting wheels that are great for cutting COPPER and ALUMINUM tubing (just don’t try and cut stainless steel with them).  Cuts tubing from 1/8” – 1-1/8” OD.  Don’t waste your money on any other cutter.  Most tube cutters on the market are for soft metals (copper, steel, brass, etc.) and will start to chip the cutting wheel as soon as you try to cut stainless steel.  DON'T BUY INFERIOR TOOLS!  PLEASE BE WARNED!!!
  • Image 5
RRP: $319.99
$279.99 (You save $40.00)
10.00 LBS
Free Shipping

 Product Description

Looking to hard line your air system?  Then you are going to need 4 things:  

1.  3/8” STAINLESS STEEL hard line. (CLICK HERE)

2.  A tube cutter that has the capability to cut STAINLESS STEEL tubing. (CLICK HERE)

3.  A deburring tool capable of cleaning up both inner and outer diameter of the tubing.  (CLICK HERE)

4.  A heavy duty tubing bender than is capable of bending 3/8” STAINLESS STEEL tubing.  (CLICK HERE)


Well you’re in luck!  AVS has all 4 of these parts in one kit!  These are the same tools we use on all of our installs.  DON'T BUY INFERIOR TOOLS!  PLEASE BE WARNED!!!  Stainless steel is VERY HARD and will break inferior tools or tools that were only made to bend soft copper and aluminum tubing.


  • 1 x Tubing Bender
  • 1 x Tubing Cutter*
  • 1 x Deburring Tool (inside and outside)
  • 20 x Feet of 3/8"Stainless Steel Tubing (240-inches to be exact - cut down to 5 x sticks at 48-inches each)
  • FREE SHIPPING to the lower 48 states**



If you would like us to cut the lengths to another shorter or longer measurement, that is no problem.  Just give us a call at (559)486-5444 with your requirements so we may accommodate you.


*PLEASE NOTE:  Tubing cutter may differ in appearance from the one pictured.





 warning-triangle-ca-final-01.pngWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Follow us on

SSL Premium True Site Seal

Contact Us

Telephone: 559-486-5444

4555 North Cedar Ave.
Fresno, CA 93726

We Accept

Copyright 2019 AVS. All Rights Reserved.
 Sitemap | BigCommerce Themes by PSDCenter

Click the button below to add the 3/8" HARD LINE KIT W/ TOOLS AND S.S. TUBING to your wish list.