Product Overview
Description: 7" Premium Lift Kit (Silver Powder Coat)
Part Number: 52053
Desired Lift: 7"
Application: 4WD, Gas Motor 8-LUG
Vehicle(s): 2002-2010 GM 2500
Kit Includes: (2) Spindles, (1) Front Crossmember, (1) Rear Crossmember, (2) Compression Struts, (1) Skid Plate, (2) Rear Bump Stop Extenders, (2) Front Bump Stop Extenders, (2) Torsion Bar Drop Brackets, (2) Differential Drop Brackets, (4) Compression Strut Brackets, (2) Lift Blocks w/ U-bolts & Hardware, (2) Lower A-Frame Support Rods, (2) CV Axle Spacers, (1) Rear Brake Line Extender, (1) Weld-in Filler Plate, (2) Zinc Brackets w/ 2 Welded Nuts & (2) Front Shocks & (2) Rear Shocks
*Optional Add-Ons:
Upper Control Arms #52151 (sold separately)
Torsion Keys #52100 (sold separately)
Traction Bars #52018 (sold separately)
Upgraded Boxed Compression Struts #52115 (sold separately)
**This kit can be adjusted to 8" or 9". You will need Torsion Keys #52100 (sold separately), to raise up the front. This will put the front of the vehicle higher than the rear. Unfortunately, we have no parts to add extra height to the rear.**
***If running this kit at the 9" position, we highly recommend using Upper Control Arms #52151 (sold separately) to help with bump stop clearance issues***
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
* Over-sized tires and heavier wheels can cause premature wear on factory and aftermarket components like ball joints, bushings, tie-rod ends, wheel bearings, idlers arms, drive-lines, etc… You may need to replace / install new components sooner than factory recommendations based on the wheels and tires you choose. Please note that the heavier and wider wheels and tires combined with aggressive driving (off-road and on highways) will cause more wear on ALL moving parts, factory and aftermarket. Especially when vehicle is in 4wd or Auto-4wd / AWD modes.
