***OVERSIZED ITEM, ADDITIONAL SHIPPING MAY APPLY***
#1. This item DOES NOT SHIP FOR FREE!!! Place your order and an AVS representative will call you with a shipping/freight total before final processing. Shipping/freight charges must be paid before item can ship.
#2. This item ships directly from the manufacturer. Lead times may vary. We will let you know the lead time for shipping when we contact you regarding the shipping total.
4 x 2 x .120" Canted Rear Frame
Made out of 2x4x.120" wall mild-steel tubing. These mandrel bent frame rails have a lower rise over the axle making it easier to fit vehicles using a 29" tall tire. The main crossmember uses the 1x2" oval loop increasing driveshaft and ground clearance. Our frame can be as narrow as 20" outside-to-outside width, allowing ample room for most tires. The 4-link is mounted under the frame rails, not on the inside like our competitors. This makes the suspension as wide as possible even with a narrow frame rail width, creating a better handling vehicle.
A pair of frame rails; two 1x2" driveshaft-loop halves; front crossmember tubing; upper shock mount crossmember; upper shock mount tabs; rear crossmember; hardware; instructions and drawing.
- Factory welding and 4"-ID exhaust ports (fits 3" exhaust).
- Frames can be ordered factory-welded or as an unassembled kit for lower freight cost.
- Suspension components and axle housings are sold seperately.
Call one of our sales associates for optional items and specifications.
- CGS Performance Products - 2011 Ford F-150
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.